Suspension
-
A-SUBS2
STRUT NUT TOOL 2PC Strut nut tool allows fast removal and replacement of strut nuts fixed in the hub without causing any damage to the hub. The set includes 2 strut nuts with 1/2″ drive 5x7x60mm and 5,5×8,2x48mm. Suitable for Audi BMW Citroen Ford Peugeot Renault Seat Skoda Volkswagen and also for most Japanese […]
-
A-SUBF4
4PCS SUBFRAME LOCATING VAG A set of four specially designed bolts for adjusting the height of the subframes to the chassis of the vehicle during the repair of the suspension.It has compatibility with a wide range of Audi and VW vehicles Appliction: Audi:A3(04-), A4(01- ); TT(07-) VW:EOS(06-), Fox(06-), Golf(09-), Golf Plus(05-), Jetta(04-06), Passat(06-),Passat CL(09-), […]
-
A-9109
BUSH REMOVER / INSTALLER TOOL SET Suitable for the removal and replacement of bushes in VAG Cars. 1.Extracting srew sleeve 2. Protective sleeve 3. Screw main 4. Nut-with flange.
-
A-757PS
DISASSEMBLY AND ASSEMBLI TOOL OF SHOCK ABSORBERS WITH INTERNAL SPRINGS Designed to fix the McPherson Strut in the full extended position when replacing the main-spring. The tool is used for struts which are equipped with strong internal springs (tension stop springs).
-
A-724P
Real Bush Tool Kit Model Rear Axle For the removal and replacement of the bushes in the rear axle of the Renault Laguna II. SET: 1.pressure sleeve 2.safety sleeve 3.main screw 4. flange screw
-
A-LBJ51 / A-LBJ60
LOWER BALL JOINT SOCKET CITROEN / PEUGEOT Special structure with 4 pins allows to allows to remove the ball joint Without damaging other components. Driver: 3/4″ Size: 19 x 45 mm Wed OD: 50.8 mm Wed ext.: 43.00 mm; pins size: 4 x 4.1 mm. Application: Citronen BX (82-94), Citroen C5, Xantia, Peugeot […]
-
A-711
UNIVERSAL STEERING KNUCKLE SPREADER TOOL Used to separate the steering Knuckle to remove the shock absorber without damaging the knuckle. Can be used on centralized and non-centralized slots for car brands like Audi, BMW, Citroen, VW, Ford Skoda, Seat, Renault, Peugeot and many Japanese vehicles.
-
A-706G
HYDRAULIC RAM & SLIDE HEMMER PULLER KIT Suitable for instalation and removal dis brakes and wheel hub. TECHNICAL DATA: Hydraulic ram-capacity 12T, piston diameter 37.7 mm For 5-and 3- bolt grip Range: 116 mm – 134 mm Crip Diameter: Ø 148.5 mm.
-
A-706A4L
Universal Hydraulic Gear Puller Kit 12T This press tool set allows quick and easy removal and replacement of the ball joint and can be performed on the vehicle within a few minutes. Application: Sprinter, BMW serie 3 E36, Master, LT, etc.
-
A-290A
KIT BEARING ASSEMBLY AND DISASSEMBLY VAG Designed to replace silent blocks in front swingarm. Adapter Spindle M10x1.25 S45C carbon steel. APPLICATION: VW Polo IV (9N) 02-05; Seat lbiza IV (6L) 02-06; Seat Cordoba 02; Altea; Skoda Fabia I; Skoda Roomster, Audi A2.